WWW.JCBDEALER.COM

JS 130 - Tracked Excavators
	The JCB JS130 offers high performance and excellent reliability from an Isuzu engine and Japanese hydraulic components. When considered alongside the impressive all-round performance, it means you won’t find an excavator in this class that can be trusted more for long-term productivity.   LONG-LIFE RELIABILITY The JCB Plexus filter cleans the hydraulic oil down to 1.5 microns, dramatically cutting down on dirt and condensation in the system. The oil also goes 5,000 hours between changes. Consequently, servicing intervals are increased, downtime is reduced and overall machine reliability enhanced. · 500 hour engine oil and filter changes, twice as long as many machines, are achieved by the combination of two large oil filters - one full flow, the second a fine by-pass filter - which reduce servicing requirements, inconvenience and downtime. The ’X’ frame type undercarriage is integrally welded for strength and durability, and has excellent ground clearance. Underbelly guarding provides added protection for arduous sites. In the unlikely event of a system malfunction, a built-in self-diagnostic facility enables rapid fault identification. To eliminate downtime with an electronic malfunction, a fall back-up system can be operator activated

JS 160L/NL - Tracked Excavators
	The JS160 provides long-term productivity that won’t let you down. With the Plexus filter further helping to safeguard the machine’s systems, it is clearly the most reliable high performance excavator in its class.   EXCEPTIONALLY LOW MAINTENANCE The JCB Plexus filter cleans the hydraulic oil down to 1.5 microns, dramatically cutting down on dirt and condensation in the system. The oil also goes 5,000 hours between changes. Consequently, servicing intervals are increased, downtime is reduced and overall machine reliability enhanced. · 500 hour engine oil and filter changes, twice as long as some machines, are achieved by the combination of two large oil filters - one full flow, the second a fine by-pass filter - which reduce servicing requirements, inconvenience and downtime. In the unlikely event of a system malfunction, a built-in self-diagnostic facility enables rapid fault identification. To eliminate downtime with an electronic malfunction, a fall back-up system can be operator activated. SUPERIOR COMFORT No cab offers greater comfort. It’s a high quality steel cab mounted on 6 fluid filled resilient mountings which insulate against noise and vibration while minimising movement when tracking over rough ground. With the fully adjustable suspension seat, short stroke servo levers and lightweight track controls, the operator will find the JS160 easy and comfortable to operate. Ventilation is exceptional with large opening door windows and a spring-assisted opening front window. The standard large capacity heater and demister can be combined with optional air conditioning for total in-cab temperature control. The ’Cushion Control’ feature reduces shock to the operator as well as to the dipper and boom during excavator operations. This is in addition to standard ram end damping. Numerous features are fitted to enhance comfort such as a digital radio/cassette player, cigarette lighter, clock and storage area.

JS 220 - Tracked Excavators
	The JS220 New Generation machine has the power and lift capacity to undertake the most demanding of jobs. The modern styling makes this machine distinctive on any site while the control and visibility benefits will be obvious to any operator. Marrying Japanese components with European structures and undercarriage ensures that the machine will be powerful, and durable while retaining efficiency and minimising running costs.   POWER The 102KW engine meeting stage 2 emissions standards is powerful and reliable. Four different work modes can be selected to maximise productivity, fuel economy and control by matching the machine’s output to the operating conditions. Auto Mode (A) constantly senses the hydraulic requirements and adjusts engine and hydraulic power accordingly. Economy Mode (E) is for general excavating and loading; Fine Mode (F) is for precise, lighter duty finishing work; Lifting Mode (L) is for operations needing fingertip accuracy including lifting, with extra pressure available for jobs such as trench box/shuttering extracting. Boom priority hydraulic system: Increased operating speed for faster cycle times. Reduced down speed allows greater control . Increased in-system pressure: Booster provides 10% in-system pressure increase for improved bucket and dipper tearout forces. Powerful swing system: 22 metric ton machine feature s smoother handling of large loads on steep inclines. CONTROLS Excellent controllability ensures smooth operation while multi functioning. Joystick mounted track gear selection makes changing speed easier. The ’Cushion Control’ feature reduces shock to the operator as well as to the dipper and boom during excavator operations. This is in addition to the standard ram end damping. Cushion control also incorporates a heater circuit to speed up servo system warm up for improved control following machine start up The multi-function hydraulic system allows simultaneous smooth control of all excavator functions. It also ensures straight line tracking at all times, whether other functions are being used or not. OPERATOR ENVIRONMENT. Large glass areas mean excellent visibility especially low down to the operator’s left or right, and to the rear of the machine over the low bonnet line and rounded counterweight. The front screen is also fitted with intermittent wash/wipe as standard. The display monitor is mounted tight against the front pillar allowing the operator to monitor the information while maximising the visibility of the bucket or attachment.A large roof light gives a clear view of the raised attachment and any overhead obstacles. No cab offers greater comfort. It’s spacious and well appointed. And it’s mounted on 6 fluid filled resilient mountings which insulate against noise and vibration while minimising movement when tracking over rough ground. With the comfortable and adjustable seat, the operator will find it easy to find the best position in relation to the controls. Both the seat and control console can be adjusted independently. The seat and control console can then be moved in unison for cockpit style adjustment. The seat can fully recline. Ventilation is exceptional with large opening door windows and a spring-assisted opening front window. Fan-assisted fresh air ventilation takes over when the doors and windows need to be closed. And for total in-cab temperature and fan speed control, there’s a fresh air/recycle heater and demister. Air conditioning is available as an option. wide door, together with conveniently positioned grab rails, means easy cab entry. Numerous features are fitted to enhance comfort such as a digital radio/cassette player, cigarette lighter, ashtray, clock and storage box. Instrumentation is very user-friendly. One touch switches are covered with a membrane for easy cleaning and are back-lit for night working. Written information on the machine’s vital functions is transmitted via the illuminated LCD monitor in any of 12 European languages. Contrast control ensures that the monitor can be easily read whatever the light.

JS 260 - Tracked Excavators
	The JS260 is the most reliable high performance excavator in its class. The unique JCB Plexus filter means it further improves upon an established reputation for long-lasting ability. This extra fine hydraulic fluid filtration system helps keep oil substantially cleaner which in turn means reduced downtime, less maintenance and prolonged component life. With the proven Japanese pedigree of the hydraulics, the Isuzu engine and a sophisticated hydraulic control system, it is capable of powering through the heaviest of workloads. The most modern and well equipped of cabs helps achieve the unprecedented standards of operator comfort. The JS260. It’s the high performance excavator you can really rely on.   AMS – Advanced Management System: Maximizes machine performance and minimizes fuel consumption by matching the engine to the hydraulic output. Full diagnostics minimize downtime and allow machine usage to be analyze d . Plexus filtration system: Cleans hyd raulic oil down to 1.5 microns for improved system reliability. Extends filter life for 1,000 hour changes and hydraulic oil for 5,000 hour changes. Boom priority hydraulic system: Increased operating speed for faster cycle times. Reduced down speed allows greater control . Increased in-system pressure: Booster provides 10% in-system pressure increase for improved bucket and dipper tearout forces. Powerful swing system: 22 metric ton machine feature s smoother handling of large loads on steep inclines. Durable build: X - frame undercarriage with good ground clearance, large diameter swing ring and belly guards as standard . Superb operator environment: Features deluxe suspension seat, new shorter control levers, clear all - round visibility, cushion control and Auto Plus one-touch idle controls and air conditioning.

JS 330 - Tracked Excavators
	PRODUCTIVITY AND PERFORMANCE AMS – Advanced Management System: Maximizes machine performance and minimizes fuel consumption by matching the engine to the hydraulic output. Full diagnostics minimize downtime and allow machine usage to be analyze d . Powerful slew system means smooth operation of large loads even on steep inclines. Power boost facility provides an instant 10% increase in tearout performance. The load sensing system maintains the power demand on the engine at a constant level for efficient running. Flow on demand means output is proportional to lever movement for increased efficiency. RELIABILITY AND DURABILITY Strong and durable X-frame undercarriage allows good ground clearance. Belly guards are fitted as standard to protect the hydraulic lines. Narrow long carriage option is available. High quality hydraulic components ensure reliable performance. Plexus filtration system lengthens the life of hydraulic components. Large diameter slew ring is strong and reliable. 184.6kW/247.6hp turbo charged and intercooled Isuzu engine provides powerful performance with renowned reliability. Twin engine filters allow longer intervals between engine services to minimise non-productive time. OPERATOR ENVIRONMENT Modern styled cab features a two piece front window, separated by a clear strip, to maximise forward visibility. A large door allows easy access and the high roof adds to a spacious feeling. Adjustable height and weight facilities on the deluxe suspension seat help minimise operator fatigue. Easy to use short control levers have built-in controls for selecting low flow circuits. Auto Idle cuts in automatically when machine is not actively in use for greater fuel efficiency. Engine speed only increases when the one touch button is intentionally pressed. Air conditioning is standard for complete climate control. Vents positioned behind the operator and to the front screen ensure good ventilation. SERVICEABILITY The unique Plexus filtration system gives hydraulic filter change intervals of 1,000 hours and hydraulic oil change intervals of 5,000 hours. Twin engine oil filters mean 500 hour engine oil and filter changes. The self diagnostic system, with the computer self check facility, provides essential information for the service engineer. Grouped pressure points are more convenient for testing. Thoughtful layout of hydraulic componentry simplifies service access.

JS 460 - Tracked Excavators
	Specifically designed for the most challenging of environments, the JS460 is an extremely robust crawler excavator. Equipped with a powerful Isuzu engine that has proven reliability in climates across the world, plus a highly advanced hydraulic control system, it is highly productive, durable and effective.   The 6 cylinder turbocharged and intercooled engine offers a powerful 228kW (305hp). It is coupled with an in-line direct injection fuel system which provides high combustion efficiency for low fuel consumption. The control panel and servo-assisted controls are within easy reach. Also, the AMS monitor is easily visible without obscuring the operator’s view from the cab. First time starting, in the coldest of conditions, is assisted by automatic pre-heat in each cylinder. The heavy duty boom and reinforced dipper arm are made for tough excavation work and extracting hard material. The control panel and servo-assisted controls are within easy reach. Also, the AMS monitor is easily visible without obscuring the operator’s view from the cab. The pressed steel cab is spacious and sound insulated, with large safety glass areas for excellent all-round visibility. The front window is spring assisted to slide easily into the cab roof. The ’Cushion Control’ feature reduces shock to both operator and machine during excavator operations. To reduce operator fatigue caused by cab vibration - especially when tracking at high speed - the cab is mounted on unique combined hydraulic and rubber suspension units. AMS – Advanced Management System: Maximizes machine performance and minimizes fuel consumption by matching the engine to the hydraulic output. Full diagnostics minimize downtime and allow machine usage to be analyze d . Four work modes can be selected for greater productivity and fuel economy in different operating conditions: H-Mode for continuous high production or digging in hard ground. S-Mode for general excavating or trenching. L-Mode for lighter duty finishing work or precise positioning. Plus F-Mode for fine work and lifting. The ’One-touch Idling’ feature on the servo control lever means that engine revolutions can be dropped to idle at the touch of a button, then easily returned to its original setting. This reduces fuel consumption at non-productive times and allows maximum control. The air conditioning system is capable of quick heating, cooling and dehumidifying the cab environment. The suspension seat is fully adjustable to suit individual posture. Both armrests, including the excavator controls, slide backwards and forwards for optimum operator comfort. The left-hand armrest also lifts up for easy cab access. The extra length and weight of the fabricated frame undercarriage provides a safe and stable operating platform. The track chain is sealed for maximum wearing life - even under the stress of lengthy high speed tracking periods. The underguarded frame, turret and track frames are all extremely robust, and are designed and tested for long machine life. The large radiator is fitted with a removable fine mesh grille to filter out debris, maintain cleanliness and provide efficient cooling.