WWW.JCBDEALER.COM

	407 ZX - Wheeled Loaders
	This compact series of loaders from JCB are the high technology answer to all competitive machines of the type. Uncompromised performance, quiet, comfortable working environment, compact dimensions, non complicated design, and up to date styling combine to create a best in class product.   Z-BAR LOADER Offers faster cycle times, excellent rollback and dump angles and powerful breakout for high productivity. Return to dig and parallel lift is incorporated into the loader geometry as standard ensuring fast cycle times and safe accurate pallet handling. Loader arms are constructed from flat plate resulting in higher strength and good visibility to side of attachment. Incorporating minimal pivot pin for low maintenance. Integral loader quickhitch resulting in no loss of breakout force, maximise load carrying ability. HYDROSTATIC TRANSMISSION High efficiency and variable speed control. (Rexroth - used by all major competitors) Optimum power at all times whatever the terrain with minimal stress placed on the engine and transmission. Two pre set speed ranges giving maximum tractive effort. Low speed 0-6 kph allows for precision control while high speed 0 - 20 kph can be used between sites. Optional 30 kph available. Hydrostatic drive also provides dynamic braking as the accelerator is released. Portal axles are fitted directly to the mainframe ensuring good stability and excellent ground clearance. Optional limited slips differentials are also available for arduous conditions. ARTICULATION The centre pivot is a substantial (130 mm diameter) steel forging providing both articulation and oscillation movement offering greater positive feedback to the operator as to the machine stability (when compared to floating rear axle). Heavy-duty plain bearings carry the weight of the machine whilst articulation movement is restrained by taper roller upper & lower bearings. Tested for 500000 cycles with no defect. MAINFRAME Front chassis carries the loader unit minimising any cables and pipework crossing the centre pivot. Well designed engine and cab mount contributes to achieving an exceptionally low 101/73 db in cab noise level. The engine is mounted transversely enhancing the rearward view from the cab and also reduces the machines tailswing radius CAB & CONTROLS ROPS & FOPS cab offering maximum comfort and excellent all round visibility with ease of control. Two-door access for greater operator comfort. Hydraulic servo joystick loader controls with armrest offering fatigue free loader operation. Optional forward and reverse switch mounted on the joystick allows for easy and safe operation. Combined brake and inching pedal allows further control. The ’inching’ control pedal progressively disengages the transmission, allowing extra low travel speed with maximum engine speed for increased loader usage especially in sweeping applications

409 ZX - Wheeled Loaders
	This compact series of loaders from JCB are the high technology answer to all competitive machines of the type. Uncompromised performance, quiet, comfortable working environment, compact dimensions, non complicated design, and up to date styling combine to create a best in class product.   Z-BAR LOADER Offers faster cycle times, excellent rollback and dump angles and powerful breakout for high productivity. Return to dig and parallel lift is incorporated into the loader geometry as standard ensuring fast cycle times and safe accurate pallet handling. Loader arms are constructed from flat plate resulting in higher strength and good visibility to side of attachment. Incorporating minimal pivot pin for low maintenance. Integral loader quickhitch resulting in no loss of breakout force, maximise load carrying ability. HYDROSTATIC TRANSMISSION High efficiency and variable speed control. (Rexroth - used by all major competitors) Optimum power at all times whatever the terrain with minimal stress placed on the engine and transmission. Two pre set speed ranges giving maximum tractive effort. Low speed 0-6 kph allows for precision control while high speed 0 - 20 kph can be used between sites. Optional 30 kph available. Hydrostatic drive also provides dynamic braking as the accelerator is released. Portal axles are fitted directly to the mainframe ensuring good stability and excellent ground clearance. Optional limited slips differentials are also available for arduous conditions. ARTICULATION The centre pivot is a substantial (130 mm diameter) steel forging providing both articulation and oscillation movement offering greater positive feedback to the operator as to the machine stability (when compared to floating rear axle). Heavy-duty plain bearings carry the weight of the machine whilst articulation movement is restrained by taper roller upper & lower bearings. Tested for 500000 cycles with no defect. An inching pedal facility enables progressive disengagement of the transimission for any precise movements requiring a high engine speed. Optional limited slip differentials ensure independent and, therefore, more efficient transmission of power to each wheel for maximum tractive effort. It also provides superior braking performance. MAINFRAME Front chassis carries the loader unit minimising any cables and pipework crossing the centre pivot. Well designed engine and cab mount contributes to achieving an exceptionally low 101/73 db in cab noise level. The engine is mounted transversely enhancing the rearward view from the cab and also reduces the machines tailswing radius CAB & CONTROLS ROPS & FOPS cab offering maximum comfort and excellent all round visibility with ease of control. Two-door access for greater operator comfort. Hydraulic servo joystick loader controls with armrest offering fatigue free loader operation. Optional forward and reverse switch mounted on the joystick allows for easy and safe operation. Combined brake and inching pedal allows further control. The ’inching’ control pedal progressively disengages the transmission, allowing extra low travel speed with maximum engine speed for increased loader usage especially in sweeping applications.

411 HT - Wheeled Loaders

411 HT - Wheeled Loaders
	This compact series of loaders from JCB are the high technology answer to all competitive machines of the type. Uncompromised performance, quiet, comfortable working environment, compact dimensions, non complicated design, and up to date styling combine to create a best in class product.   Z-BAR LOADER Offers faster cycle times, excellent rollback and dump angles and powerful breakout for high productivity. Return to dig and parallel lift is incorporated into the loader geometry as standard ensuring fast cycle times and safe accurate pallet handling. Loader arms are constructed from flat plate resulting in higher strength and good visibility to side of attachment. Incorporating minimal pivot pin for low maintenance. Integral loader quickhitch resulting in no loss of breakout force, maximise load carrying ability. HYDROSTATIC TRANSMISSION High efficiency and variable speed control. (Rexroth - used by all major competitors) Optimum power at all times whatever the terrain with minimal stress placed on the engine and transmission Two pre set speed ranges giving maximum tractive effort. Low speed 0-6 kph allows for precision control while high speed 0-20 kph can be used between sites. Hydrostatic drive also provides dynamic braking as the accelerator is released. Standard axles are used with oil immersed brakes fittted into the hub (411 ZX only). ARTICULATION The centre pivot is a substantial (130 mm diameter) steel forging providing both articulation and oscillation movement offering greater positive feedback to the operator as to the machine stability (when compared to floating rear axle). Heavy-duty plain bearings carry the weight of the machine whilst articulation movement is restrained by taper roller upper & lower bearings. Tested for 500000 cycles with no defect. CHASSIS Front chassis carries the loader unit minimising any cables and pipework crossing the centre pivot. Well designed engine and cab mount contributes to achieving an exceptionally low in cab noise level. The engine is mounted transversely enhancing the rearward view from the cab and also reduces the machines tailswing radius All service points are easily accessed and cleaned CAB & CONTROLS ROPS & FOPS cab offering maximum comfort and excellent all round visibility with ease of control. Two-door access for greater operator comfort. Hydraulic servo joystick loader controls with armrest offering fatigue free loader operation. Optional forward and reverse switch mounted on the joystick allows for easy and safe operation. Seperate brake and inching pedal allows further control. The ’inching’ control pedal progressively disengages the transmission, allowing extra low travel speed with maximum engine speed for increased loader usage especially in sweeping applications.

	426 ZX - Wheeled Loaders
	The Z bar geometry ensures top digging performance from this durable, reliable and exceptionally comfortable wheeled loader. Designed for the most demanding environments, its build quality ensures long-life performance. And with an extremely well appointed cab minimising operator fatigue, impressive productivity is certain.   HIGH PRODUCTIVITY. Perkins 1000 Series engine produces 102kW nett (137hp). Coupled to the semi-automatic transmission, it generates class leading performance and is highly fuel efficient. Z bar geometry means high breakout forces for easy bucket filling and immense digging ability. Optional limited slip differentials on the front and rear increase traction in poor conditions. The optional Automatic Carry Control System reduces machine bounce, increases productive capacity and improves operator comfort during load and carry cycles. LONG-LIFE DURABILITY Quality design and heavy-duty construction result in a rugged machine built for a long productive life. Multi-plate, oil immersed disc brakes are mounted in wheel hubs to eliminate damage from abrasive materials and to minimise maintenance requirement. Load sensed hydraulics reduce wear and minimise fuel consumption by delivering oil only on demand. Steering cylinders are mounted high on the mainframe for greater protection against the elements. Quality electrical harness, connectors and sender units are to IP67 standard. SERVICEABILITY Electronic Monitoring System (EMS) warns of any potential system failure. It includes a data logging and downloading capacity. Pin and bush design only require greasing every 100 hours. All servicing points and major components are easy to access. OPERATOR COMFORT. Ergonomically designed cab includes a fully adjustable seat and steering column for greater comfort and minimal fatigue. The cab is pressurised with positive filtration to keep the air clean. Air conditioning is optional to help maintain a dust-free and comfortable environment. Low sound pressure level in the cab minimises operator fatigue. Automatic return to dig, with kickout on lift, helps reduce operator fatigue. Single lever servo hydraulic controls, with integrated transmission kickdown and disconnect, further add to ease of use. The optional fully automatic transmission ensures real ease of operation for more productive machine utilisation.

	436 HT - Wheeled Loaders
	The JCB 436B HT gives exceptional productivity and genuine economy. Its four ram geometry provides real high torque which allows a wide variety of attachments to be used without compromising performance. And to ensure optimum operator comfort, it has one of the highest specification cabs in this class.   HIGH PRODUCTIVITY Perkins 1000 Series engine produces 122kW nett (163hp). Coupled to the semi-automatic transmission, it generates class leading performance and is highly fuel efficient. Four ram geometry delivers high torque for versatile performance on all applications. Two loader hydraulics modes provide a choice of speed or power for specific applications. Optional limited slip differentials on the front and rear increase traction in poor conditions. The optional Automatic Carry Control System reduces machine bounce, increases productive capacity and improves operator comfort during load and carry cycles. LONG-LIFE DURABILITY Quality design and heavy-duty construction result in a rugged machine built for a long productive life. Multi-plate, oil immersed disc brakes are mounted in wheel hubs to eliminate damage from abrasive materials and to minimise maintenance requirement. Load sensed hydraulics reduce wear and minimise fuel consumption by delivering oil only on demand. Steering cylinders are mounted high on the mainframe for greater protection against the elements. Steering cylinders are mounted high on the mainframe for greater protection against the elements. OPERATOR COMFORT Ergonomically designed cab includes a fully adjustable seat and steering column for greater comfort and minimal fatigue. The cab is pressurised with positive filtration to keep the air clean. Air conditioning is optional to help maintain a dust-free and comfortable environment. Low sound pressure level in the cab minimises operator fatigue. Automatic return to dig, with kickout on lift, helps reduce operator fatigue. Single lever servo hydraulic controls, with integrated transmission kickdown and disconnect, further add to ease of use. The optional fully automatic transmission ensures real ease of operation for more productive machine utilisation. SERVICEABILITY Electronic Monitoring System (EMS) warns of any potential system failure. It includes a data logging and downloading capacity. Pin and bush design only require greasing every 100 hours. All servicing points and major components are easy to access.

	436 ZX - Wheeled Loaders
	Robust, powerful and with the digging performance that comes with Z bar geometry, the JCB 436B ZX is fully equipped for the demands of the extraction industry. With a top quality build ensuring durability and a high specification cab minimising operator fatigue, you are certain of outstanding reliability and performance.   HIGH PRODUCTIVITY Perkins 1000 Series engine produces 122kW nett (163hp). Coupled to the semi-automatic transmission, it generates class leading performance and is highly fuel efficient. Z bar geometry means high breakout forces for easy bucket filling and immense digging ability. Two loader hydraulics modes provide a choice of speed or power for specific applications. Optional limited slip differentials on the front and rear increase traction in poor conditions. The optional Automatic Carry Control System reduces machine bounce, increases productive capacity and improves operator comfort during load and carry cycles. OPERATOR COMFORT Ergonomically designed cab includes a fully adjustable seat and steering column for greater comfort and minimal fatigue. The cab is pressurised with positive filtration to keep the air clean. Air conditioning is optional to help maintain a dust-free and comfortable environment. Low sound pressure level in the cab minimises operator fatigue. The optional fully automatic transmission ensures real ease of operation for more productive machine utilisation. Automatic return to dig, with kickout on lift, helps reduce operator fatigue. Single lever servo hydraulic controls, with integrated transmission kickdown and disconnect, further add to ease of use. LONG-LIFE DURABILITY Quality design and heavy-duty construction result in a rugged machine built for a long productive life. Multi-plate, oil immersed disc brakes are mounted in wheel hubs to eliminate damage from abrasive materials and to minimise maintenance requirement. Load sensed hydraulics reduce wear and minimise fuel consumption by delivering oil only on demand. Steering cylinders are mounted high on the mainframe for greater protection against the elements. Exhaust system is made from stainless steel for a longer life. SERVICEABILITY Electronic Monitoring System (EMS) warns of any potential system failure. It includes a data logging and downloading capacity. Pin and bush design only require greasing every 100 hours. All servicing points and major components are easy to access.

446 ZX - Wheeled Loaders
	HIGH PRODUCTIVITY The engine produces 121kW (162hp), coupled to the semi-automatic transmission, it generates class leading performance and is highly fuel efficient. Four ram geometry delivers high torque for versatile performance on all applications. Two hydraulic pumps provide a choice of speed or power automatically. Optional limited slip differentials on the front and rear increase traction in poor conditions. The optional Automatic Carry Control System reduces machine bounce, increases productive capacity and improves operator comfort during load and carry cycles. LONG-LIFE DURABILITY Quality design and heavy-duty construction result in a rugged machine built for a long productive life. Multi-plate, oil immersed disc brakes are mounted in wheel hubs to eliminate damage from abrasive materials and to minimise maintenance requirement. Load sensing hydraulics reduce wear and minimise fuel consumption by delivering oil only on demand. Steering cylinders are mounted high on the mainframe for greater protection against the elements. Exhaust system is made from stainless steel for a longer life. OPERATOR COMFORT Ergonomically designed cab includes a fully adjustable seat and steering column for greater comfort and minimal fatigue. The cab is pressurised with positive filtration to keep the air clean. Air conditioning is optional to help maintain a dust-free and comfortable environment. Low sound pressure level in the cab minimises operator fatigue. Automatic return to dig, with kickout on lift, helps reduce operator fatigue. Single lever servo hydraulic controls, with integrated transmission kickdown hydraulic power boost, further add to ease of use. The optional fully automatic transmission ensures real ease of operation for more productive machine utilisation. SERVICEABILITY Electronic Monitoring System (EMS) warns of any potential system failure. It includes a data logging and down-loading capacity. Pin and bush design only require greasing every 100 hours. All servicing points and major components are easy to access.

456 ZX - Wheeled Loaders
	Equipped with Cummins power and Z bar geometry, the robust JCB 456B ZX is designed for a lifetime of powerful performance. Designed to the highest specification, this rugged wheeled loader is perfect for the toughest conditions while the operator environment is as comfortable and as user-friendly as you’ll find.   LONG-LIFE DURABILITY Quality design and heavy-duty construction result in a rugged machine built for a long productive life. Multi-plate, oil immersed disc brakes are mounted in wheel hubs to eliminate damage from abrasive materials and to minimise maintenance requirement. Load sensing hydraulics reduce wear and minimise fuel consumption by delivering oil only on demand. Steering cylinders are mounted high on the mainframe for greater protection against the elements. Exhaust system is made from stainless steel for a longer life. HIGH PRODUCTIVITY The high performance Cummins C Series engine is built for longevity and reliability. It generates 153kW nett (205hp) and produces excellent torque rise. Together with the fully automatic transmission, it generates class-leading performance while giving excellent fuel efficiency. Z bar geometry means high breakout forces for easy bucket filling and immense digging ability. Impressive loadover height and reach allow easy truck and hopper loading. When selected, the optional Automatic Carry Control System reduces machine bounce. Activated at speeds over 7kph, it cushions the bucket lift rams using accumulators to minimise the pitching effect on rough ground. As well as increasing productive capacity, it also improves operator comfort during load and carry cycles. OPERATOR COMFORT Operator environment provides a high level of comfort and all-round visibility. Ergonomically designed cab includes a fully adjustable seat and steering column for greater comfort and minimal fatigue. Air conditioning is standard maintaining a dust-free and comfortable environment. The cab is pressurised with positive filtration to keep the air clean. Low sound pressure level in the cab minimises operator fatigue. Fully automatic transmission ensures real ease of operation for more productive machine utilisation. SERVICEABILITY Electronic Monitoring System (EMS) warns the operator of any potential system failure. It includes a data logging and downloading capacity. Pin and bush design only require greasing every 100 hours. All servicing points and major components are easy to access. Swing out transmission and air conditioning coolers make radiator cleaning easy.